← All notes & connection map

Thrust

Created on: 2025-02-06
Tags: #Thrust
Course: Airbreathing Propulsion


Definition

  • The axial force produced by the engine is called thrust.
  • By control volume analysis, we can calculate the thrust produced by the aircraft.
  • The net uninstalled thrust produced by the jet engine \(F_{un} = (\dot{m_{0}} + \dot{m_{f}})V_{e} - \dot{m_{0}}V_{0} + (p_{e}-p_{0})A_{e}\)
  • The 1st term is contribution from exhaust momentum.
  • The 3rd term is the pressure-area contribution.
  • The 2nd term is known as ram-drag, it is inlet momentum. It is the penalty of bringing air in the engine with a finite momentum.
  • The 1st and 3rd term comprise the gross thrust ($F_{g}$). \(F_{un} = F_{g} - D_{ram}\)
  • At takeoff, the air speed $V_{0}$ is often ignored since $V_{e}\gg V_{0}$.
  • The engine nozzle is assumed to be perfectly expanded i.e. $P_{e} = P_{a}$.
  • Therefore, the thrust is reduced to \(T_{takeoff} = \dot{m_{0}}V_{e}\)
  • Installed Thrust: Thrust where the installation losses such as nacelle skin friction and pressure drags are accounted. \(F_{installed} = F_{uninstalled} - D_{nacelle}\)

    Specific Thrust

  • The specific thrust of the aircraft is ratio of thrust to air mass flow rate. \(T_{sp} = \frac{T}{\dot{m_{0}}}\)
  • The magnitude of thrust produced is directly proportional to the mass flow rate of the fluid flow through the engine.
  • The non-dimensional specific thrust is given as \(\text{Nondimensional Specific Thrust} = \frac{F}{\dot{m_{0}}a_{0}}\)

Specific Fuel Consumption

  • The ability to produce thrust with a minimum of fuel expenditure is an important performance parameter.
  • The ratio of fuel flow rate per unit thrust force produced is called thrust-specific fuel consumption (TSFC) \(TSFC = \frac{\dot{m}_{f}}{F}\)
  • TSFC has to be minimized.
  • Specific Impulse is the ratio of thrust produced per unit propellant weight flow rate. \(I_{s} = \frac{F}{\dot{m}_{f}g_{0}}\)

    Thermal Efficiency

  • The ability of an engine to convert the thermal energy inherent in the fuel to a net kinetic energy gain of the working medium is called the engine thermal efficiency. \(\eta_{th} = \frac{\Delta KE}{E_{thermal}} = \frac{(\dot{m}_{0}+\dot{m}_{f})V_{e}^2 - \dot{m}_{0}V_{0}^2}{2\dot{m}_{f}Q}\)
  • Compares the mechanical power production to the thermal power investment in the engine.

Propulsive Efficiency

  • The fraction of the net mechanical output of the engine which is converted into thrust power is called propulsive efficiency.
  • The net mechanical output of the engine is $\Delta KE$.
  • The thrust power is $F \cdot V_{0}$.
  • Therefore, the propulsive efficiency is defined as \(\eta_{p} = \frac{F \cdot V_{0}}{\Delta KE}\)
  • Propulsive Efficiency is based on installed thrust.
  • An important result is derived if the uninstalled thrust is used \(\eta_{p} = \frac{2}{1 + \frac{V_{e}}{V_{0}}}\)
  • An engine achieves 100% propulsive efficiency, if the exhaust velocity is equal to the freestream velocity but then how the engine will produce thrust.
  • Therefore $V_{e}>V_{0}$ is needed to produce some thrust and hence, 100% propulsive efficiency is not possible.

Overall Efficiency and Range

  • The overall efficiency of the engine $\eta$ is given as \(\eta = \eta_{p} \times \eta_{th}\)
  • The range of the aircraft is given as \(R = M_{0}\frac{L}{D} \frac{a_{0}/g_{0}}{TSFC} \ln\left( \frac{W_{i}}{W_{f}} \right)\)
  • The range is inversely proportional to the TSFC. Hence, lower fuel consumption will lead to the larger range for a given amount of fuel. ‘’

Linked from

  • No other published notes link here yet.