← All notes & connection map

Bending

Created on: 2025-02-03
Tags: #Bending
Course: Aircraft Structures


Definition

  • Open section & closed section beams.
  • Both types subjected to axial, bending, shear and torsional loads.

    Asymmetric Bending

  • Asymmetric Bending: Bending moment doesn’t act in the plane of symmetry.
  • Neutral axis passes through the centroid of the cross-section. \(\sigma_{z} = \frac{E\xi}{\rho} = \frac{E}{\rho}(x\sin \alpha+y\cos \alpha)\)
  • Where
    • $\rho$ is the radius of curvature.
    • $\xi$ is perpendicular distance between point of application of stress and neutral axis.
  • The moments are given as \(M_{x} = \int_{A} \sigma_{z}\,y\,dA;\,\,\,\,M_{y} = \int_{A} \sigma_{z}\,x\,dA\)
  • Substituting for $\sigma_{z}$, \(M_{x} = \frac{E\sin \alpha}{\rho} I_{xy} + \frac{E\cos \alpha}{\rho} I_{xx}\) \(M_{y} = \frac{E\sin \alpha}{\rho} I_{yy} + \frac{E\cos \alpha}{\rho} I_{xy}\)
  • In matrix form \(\begin{Bmatrix} M_{x}\\ M_{y} \end{Bmatrix} = \frac{E}{\rho} \begin{bmatrix} I_{xy} & I_{xx} \\ I_{yy} & I_{xy} \end{bmatrix} \begin{Bmatrix} \sin \alpha\\ \cos \alpha \end{Bmatrix}\) Pasted image 20250203213833.png

  • The value of $\sin \alpha$ and $\cos \alpha$ can be found in terms of the moments from the above matrix equation. \(\frac{E}{\rho} \begin{Bmatrix} \sin \alpha\\ \cos \alpha \end{Bmatrix} = \frac{1}{I_{xx}I_{yy}-I_{xy}^2} \begin{bmatrix} -I_{xy} & I_{xx} \\ I_{yy} & -I_{xy} \end{bmatrix} \begin{Bmatrix} M_{x}\\ M_{y} \end{Bmatrix}\)
  • This can be substituted in the equation for $\sigma_{z}$ \(\sigma_{z} = \frac{M_{x}(I_{yy}y-I_{xy}x)}{I_{xx}I_{yy}-I_{xy}^2} + \frac{M_{y}(I_{xx}x-I_{xy}y)}{I_{xx}I_{yy}-I_{xy}^2}\)
  • If $C_{x}$ and $C_{y}$ is an axis of symmetry, $I_{xy} =0$, then \(\sigma_{z} = \frac{M_{x}}{I_{xx}}y + \frac{M_{y}}{I_{yy}}x\)
  • The deflections are related to moments through the equations \(\begin{gathered} M_{x} = -EI_{xy}u'' - EI_{xx}v''\\ M_{y} = -EI_{yy}u'' - EI_{xy}v''\\ \end{gathered}\)
  • The deflections can be found by integrating the $u’’$ and $v’’$ respectively.

Linked from