Plane Stress & Strain Problem
Created on: 2025-01-30
Tags: #PlaneStress #PlaneStrain
Course: MOS
Plane Stress
- The plane stress problem shows that $\sigma_{x}$ and $\sigma_{y}$ may exist.
- A normal strain $\varepsilon_{z}$ will develop in plane stress problem.
- The plane stress approximation works well for problems where the thickness in z-direction is negligible. \(\begin{pmatrix} \sigma_{x} & \tau & 0 \\ \tau & \sigma_{y} & 0 \\ 0 & 0 & 0\\ \end{pmatrix}\) \(\begin{pmatrix} \varepsilon_{x} & \frac{\gamma}{2} & 0 \\ \frac{\gamma}{2} & \varepsilon_{y} & 0 \\ 0 & 0 & \varepsilon_{z}\\ \end{pmatrix}\)
Plane Strain
- The plane strain problem shows that normal strain $\varepsilon_{z}$ is zero.
- The normal stress $\sigma_{z}$ should not be zero.
- The plane strain approximation works well for problem where the thickness in z-direction is finite i.e. not too small and too big. \(\begin{pmatrix} \sigma_{x} & \tau & 0 \\ \tau & \sigma_{y} & 0 \\ 0 & 0 & \sigma_{z}\\ \end{pmatrix}\) \(\begin{pmatrix} \varepsilon_{x} & \frac{\gamma}{2} & 0 \\ \frac{\gamma}{2} & \varepsilon_{y} & 0 \\ 0 & 0 & 0\\ \end{pmatrix}\)
Relationship between $G, E$ and $\nu$
- A pure shear stress at a point can be alternatively represented by the normal stresses at $45^{\circ}$ with the directions of the shear stresses. \(\sigma_{1} = -\sigma_{2} = \tau\)
- The normal strain $\varepsilon_{45^{\circ}}$ is given as \(\varepsilon_{45^{\circ}} = \frac{\tau}{2G}\)
- Now, \(\varepsilon_{45^{\circ}} = \frac{\sigma_{1}}{E} - \nu \frac{ \sigma_{2}}{E} = \frac{\tau}{E} (1+\nu)\)
- Then, \(G = \frac{E}{2(1+\nu)}\)
Linked from
- No other published notes link here yet.