Combustion Chamber
Combustion Chamber and Nozzle
Created on: 2024-11-28
Tags: #CombustionChamber
Course: Rocket Propulsion
Definition
Part of the thrust chamber/rocket engine where the combustion or burning of the propellant takes place.
- The chamber volume should be large enough for adequate atomization, mixing, evaporation and complete combustion of propellants.
- Diameter and volume can influence the cooling requirements.
- Increase in chamber pressure => reduction in chamber and nozzle length.
- Pressure drop should be minimum.
Factors affecting the progress of combustion
-
Non-uniform distribution of MR \(D_{R} = 1 - \sum^{N}_{i=1} \frac{|MR_{0} - MR_{i}|}{MR_{0}}\)
-
$D_{R} = 1$ refers to uniform distribution.
- Evaporation Constant and take taken for evaporation
- Evaporation constant due to vaporization of a droplet in a hot surrounding is given by, \(\lambda = \frac{dD^2}{dt} = \frac{8 \rho D_{FO}}{p_{l}} \ln(1+B)\) Where,
- $B = \frac{Y_{FS} - Y_{F\infty}}{1-Y_{FS}}$, Transport Number
- $D_{FO}$ - Diffusion Coefficient
- $\rho_{l}$ - Droplet density
Time taken for evaporation of a droplet of initial diameter $D_{0}$ is,
\[\tau_{v} = \frac{D_{0}^2}{\lambda}\]- Burn Rate Constant: The burn rate constant is modified for the combustion around droplet.
- Incomplete Vaporization
- The ratio of vaporized mixture of fuel and oxidizer can be different from the overall injected mixture ratio. \(\eta_{C^*,vap} = \left(\frac{\dot{m}_{ox,vap}+\dot{m}_{f,vap}}{\dot{m}_{ox,inj}+\dot{m}_{f,inj}}\right)\)
-
Combined influence of distribution and incomplete vaporization \(\eta_{C^*} = \eta_{C^*,vap} \times \eta_{C^*,dist}\)
- Characteristic Length of Thrust Chamber: The adequate length of combustion chamber is given by the ratio of chamber volume and throat area. \(L^* = \frac{V_{c}}{A_{t}}\)
Linked from
- No other published notes link here yet.