← All notes & connection map

k-OmegaSST

$k-\omega$ SST model

Created on: 2025-01-01
Tags: #k-omegaSST
Course: SU2


Definition

The $k-\omega$ SST model attempts to address these problems and give better separation prediction.

When $\epsilon=C_{\mu}k\omega$ is substituted into the $k-\epsilon$ model transport equation, an additional term is found as compared to the $k-\omega$ model transport equation.

The additional term is $$

  • 2\frac{\rho \sigma_{\omega 2}}{\omega} \nabla k:\nabla \omega $$

If we multiply this additional term by $(1-F_1)$ we can blend between the $k-\omega$ and $k-\epsilon$ models \(2(1-F_{1})\frac{\rho \sigma_{\omega 2}}{\omega} \nabla k:\nabla \omega\)

  • If $F_{1}=0$, the model is $k-\epsilon$
  • If $F_{1}=1$, the model is $k-\omega$
  • $F_{1}$ is a blending function.

$k-\omega$ BST equations

The transport equations for the $k-\omega$ BST model are komegaBST

$$

$$

The blending function $F_{1}$

  • Near the wall, $F_{1}=1$
  • Far away from the wall, $F_{1}=0$ blendingFunc

\(F_{1} = \tanh (arg_{1}^4)\)

  • $\tanh$ is used so that the transition between the models is smooth.
  • $arg_{1}$ depends on the distance to the closest wall $d$.
  • This is sometimes the same as the wall normal distance $y$.
  • It is also used to blend between the empirical constants.

SST-model

  • In the SST model, a viscosity limiter is also included. \(\mu_{t} = \frac{a_{1}pk}{\max(a_{1}\omega,SF_{2})}\)
  • The limiter results in better agreement with experimental measurements of separated flow.
  • $F_{2}$ is another blending function that is similar to $F_{1}$.
  • If $F_{2}$ or $S$ is large, then the viscosity is limited.
\[F_{2} = \tanh(arg_{2}^2)\]
  • $F_{2}$ also depends on the distance to the closest wall $d$.
  • $F_{2}$ is larger when d is small (close to the wall).
  • This is best for external aerodynamics or simulations where separation is important due to the viscosity limiter.
  • Van-Albada: More suitable and robust for separating flows.
  • Venkatakrishnan: More suitable for viscous and turbulent flows.

Versions

  • Care should be taken to check which variation of the $k-\omega$ SST model, the code uses.

Linked from

  • No other published notes link here yet.